Napoleon · Service
Napoleon Furnace Supply and Installation
BC Wide supplies and installs residential gas furnaces in Greater Vancouver as a single scope: equipment, venting and combustion air, condensate drainage, gas connection by a licensed gas fitter, permits and inspection, and commissioning. This is the only way this site sells furnaces; equipment-only pricing is not offered. This page covers Napoleon furnaces specifically.
One contract for the furnace, the venting, the gas connection and the permits
Service at a glance
- Provider
- BC Wide Heating & Air Conditioning
- Where
- Greater Vancouver, BC
- Hours
- Monday–Thursday 7 am–10 pmFriday 7:30 am–10 pmSaturday 8 am–6 pmSunday 10 am–5 pm
- Emergency
- Subject to availability
- Phone
- 604-473-9690
A furnace is not a retail product; it is a system of equipment, venting, condensate handling, gas supply, electrical connection and ducts, each governed by code. Supply-and-install puts all of those under one contract so the warranty, permits and commissioning are handled by the party responsible for the installation.
On this site, every furnace page therefore leads to a supply-and-install enquiry or a consultation, never to a price for the box alone. Manufacturer warranties typically condition on proper installation by licensed professionals, which is why BC Wide handles registration and commissioning as part of the job.
The scope is confirmed in writing before work starts: furnace, venting route and termination, condensate drain or pump, gas connection, electrical, permits and inspections. Anything the assessment recommends beyond that scope, such as ductwork or panel work, is quoted separately.
Napoleon specifics
Napoleon is one of the furnace brands BC Wide Heating & Air Conditioning lists among the brands it services in Greater Vancouver. This hub is the entry point for Napoleon gas-furnace documentation on this site; series, model and fault-code records are verified from manufacturer literature and added as they are completed, so this page grows over time.
BC Wide lists Napoleon among the brands it works on. Factory-authorized dealer status for Napoleon has not been confirmed and is not claimed here.
What is included
- Furnace selected from the heat-loss calculation, supplied and installed
- Venting, combustion-air intake and condensate drainage per manufacturer instructions and code
- Gas connection by a licensed gas fitter
- Permits and inspection requirements for the municipality or Technical Safety BC, and commissioning with combustion analysis
What is not included
- Electrical panel upgrades or work outside the mechanical area, unless quoted
- Duct rebuilds or insulation work recommended by the assessment, unless quoted
- Rebates or financing unless a verified program is listed on this site
Permits: Yes for the gas work — a gas permit from Technical Safety BC or, in the six municipalities with their own systems, from the municipality. BC Wide pulls it.
When not to DIY
- Never open the burner compartment or work on gas, combustion or venting components yourself
- Gas piping work requires a Technical Safety BC licensed gas contractor and the applicable permit
- If you smell gas, leave the building and call FortisBC at 1-800-663-9911 or 911 before anything else
How it works
Ballpark
Use the estimator or call for the published range; it is a starting point, not a quote.
Assessment
Heat loss, ducts, venting route, gas and condensate are confirmed on site.
Written proposal
Equipment, scope, exclusions, permits and price, in writing.
Installation day
Installed, commissioned, documented, and the permits closed out.
Questions people ask
Can I buy the furnace only and have someone else install it?
Not through this site. Furnaces are supplied and installed by BC Wide so that sizing, venting, permits and commissioning are handled together. Equipment-only pricing is not offered unless BC Wide confirms it.
What is included in the supply-and-install price?
The proposal lists it: furnace, venting, condensate, gas connection, electrical within the mechanical area, permits and commissioning. Anything outside that list is a separate quoted line.
Who pulls the permit for a furnace installation?
The contractor. Gas work needs a permit from Technical Safety BC or from the municipality where the city issues its own gas permits (Vancouver, Burnaby, Richmond, North Vancouver, Maple Ridge, Kelowna); some municipalities add a heating permit.
Who does the work
Technical Safety BC Licensed Gas Contractor
Licence LGA0090068, BC Wide Home Services Ltd
Source, checked 2026-09-07
BC Wide states its work is done by TSBC-licensed gas fitters and Red Seal technicians. Source
Reviews of BC Wide Heating & Air Conditioning are published on Google. This site shows no rating or count until the live figure is copied on a known date, because bcwide.ca currently states two different totals.
On-site furnace service across Greater Vancouver by BC Wide Heating & Air Conditioning
Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, Maple Ridge, Tsawwassen, Ladner, Anmore, Belcarra, Lions Bay.
Canada-wide gas furnace information: brand, model and error-code pages are reference material for anyone in Canada. Technicians are dispatched from Burnaby only.
Related
- ServiceGas Furnace InstallationNew furnace installation sized from a heat-loss calculation, not from the old furnace
- ServiceGas Furnace ReplacementReplace an aging or failed furnace with the right high-efficiency furnace for your house
- ServiceFurnace ConsultationA consultation before you buy: sizing, staging, efficiency and whether a heat pump belongs in the plan
- GuideHow to choose a gas furnace in BC: staging, AFUE, blowers and sizing explained
See a ballpark range before you talk to anyone
Answer a few questions and get a published CAD range with the assumptions spelled out. No contact details needed to see it.