Dettson · Service
Dettson Furnace Tune-Up
A seasonal tune-up by BC Wide checks ignition, combustion, airflow and safety controls on your gas furnace so it starts the Greater Vancouver heating season running correctly. Tune-ups are a lighter, seasonal companion to annual maintenance rather than a substitute for it. This page covers Dettson furnaces specifically.
Seasonal furnace tune-up before the heating season
Service at a glance
- Provider
- BC Wide Heating & Air Conditioning
- Where
- Greater Vancouver, BC
- Hours
- Monday–Thursday 7 am–10 pmFriday 7:30 am–10 pmSaturday 8 am–6 pmSunday 10 am–5 pm
- Emergency
- Subject to availability
- Phone
- 604-473-9690
A tune-up is the pre-season start-up check: confirm the furnace lights cleanly on the first try, measure flame signal and temperature rise, check the filter and blower, and verify that the condensate drains. It catches the problems that appear after a summer of sitting idle, like a stuck condensate trap or a flame sensor that has fouled just enough to cause intermittent lockouts.
If your furnace has not had a full annual maintenance in the past year, book that instead. Where a tune-up finds something more serious, the technician explains it and quotes any repair separately.
Dettson specifics
Dettson is one of the furnace brands BC Wide Heating & Air Conditioning lists among the brands it services in Greater Vancouver. This hub is the entry point for Dettson gas-furnace documentation on this site; series, model and fault-code records are verified from manufacturer literature and added as they are completed, so this page grows over time.
BC Wide lists Dettson among the brands it works on. Factory-authorized dealer status for Dettson has not been confirmed and is not claimed here.
What is included
- Start-up test through a full heating cycle
- Flame-signal, temperature-rise and gas-pressure spot checks
- Filter check and blower operation
- Condensate drain check and visual inspection of venting
What is not included
- Full combustion analysis, trap disassembly and heat-exchanger inspection, which belong to annual maintenance
- Parts, unless quoted at the visit
Permits: Routine appliance servicing does not normally require a gas permit; work that alters the gas piping (new runs, relocated connections) does. The technician confirms per job.
When not to DIY
- Never open the burner compartment or work on gas, combustion or venting components yourself
- Gas piping work requires a Technical Safety BC licensed gas contractor and the applicable permit
- If you smell gas, leave the building and call FortisBC at 1-800-663-9911 or 911 before anything else
How it works
Book before the cold
September and October are the quiet months to get a tune-up done.
The visit
Around an hour on site, depending on the furnace and its access.
What you get
A short verbal report and any recommendation in writing.
Questions people ask
What is the difference between a tune-up and maintenance?
A tune-up is a seasonal start-up check. Annual maintenance goes deeper: combustion analysis, condensate trap cleaning, heat-exchanger and burner inspection, and a review of stored fault codes.
Can a tune-up fix a furnace that is not working?
No. A furnace that has already failed needs a repair visit, which starts with diagnosis.
Who does the work
Technical Safety BC Licensed Gas Contractor
Licence LGA0090068, BC Wide Home Services Ltd
Source, checked 2026-09-07
BC Wide states its work is done by TSBC-licensed gas fitters and Red Seal technicians. Source
Reviews of BC Wide Heating & Air Conditioning are published on Google. This site shows no rating or count until the live figure is copied on a known date, because bcwide.ca currently states two different totals.
On-site furnace service across Greater Vancouver by BC Wide Heating & Air Conditioning
Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, Maple Ridge, Tsawwassen, Ladner, Anmore, Belcarra, Lions Bay.
Canada-wide gas furnace information: brand, model and error-code pages are reference material for anyone in Canada. Technicians are dispatched from Burnaby only.
Related
Speak to BC Wide now
Evening and weekend hours, seven days a week. Emergency service is subject to technician availability; call to confirm.